Aluminum Die Casting Pantograph Adapter
|Terms of Trade:||FOB,CFR,CIF,FCA|
|Min. Order:||2000 Piece/Pieces|
|Delivery Time:||35 Days|
|Packaging:||carton, PE pallet, plastic pass box|
|Place of Origin:||NINGBO|
Model No.: 407-1100
Aluminum Die Casting Pantograph Adapter, the part is a small customized part, which is used on the wiper system. The manufacturing technology for this part is high pressure die casting. We are an OEM die casting factory which specializes in high pressure die casting industry for more than 16 years, we have very rich experience in the precision casting work, usually we will provide a lot of recommendations based on the initial print and CAD data during phase of quotation, if we thought the part will have problem for die casting work, we will produce special powerpoint accordingly, then send to customer to discuss. We also will put ourselves in the shoes of the customer to save cost, such as hollow the part by only adding strengthen ribs, not only for saving the material cost for the customer, but also to make the part more suitable for die casting process.
The key characteristic for the quality control for this part is the steel insert, the material for this insert is 300 series Stainless Steel, knurl the outer surface, the insert will be overmolded while die casting. Overmold is a process of setting the insert on the mold prior to the injection, then after die casting, the insert part will be included in the aluminum part. There is a dimension requirement, which says the steel part should be 0.25 mm higher than the surface of aluminum housing. During our production, we ever found that, after die casting, the steel insert is completely lower than the aluminum housing, which is unacceptable, through investigation, it is because while setting up the insert on the mold, the insert is not completely located, then the engineer require the operator to tap the insert slightly after setting up it on the mold to make sure it is wholly assembled.
The part has surface finish requirement of powder coating, prior to this finish, the part will be polished, then vibratory deburred. As Powder coating has a process of curing the powder to solidification in over under around 200 degree temperature. The density of the part is important, or if the part have problem of plenty of porosity inside, because of thermal expansion, the air will be heated to get out from the part, leading to bubbles on the powder coating surface, which is not allowed, not only for cosmetic appearance requirement, but also the functional reason, as the bubble will be easily broken, then the aluminum will expose to the air, the objective for corrosion protection is meaningless.
The material of the part is ADC-12, a Japanese aluminum type. The material should conform to standard of JIS H 5302-2000, a very common material in high pressure die casting. This material has good property of fluidity, and good property of processability.
Cavity Number: 1
Process Technology: High pressure die casting, Cold Chamber
Product Dimensions: Customized
Casting General Tolerance: Grade GB-CT4
Surface Finish: Polishing, Vibratory Deburring
Flow Processes: Die casting, Trimming, Deburring, Polishing to have smooth surface, CNC Machining, Cleaning, Packaging, Shipping
Control Measure: Incoming Material Test, First Article inspection, Routing inspection, Final item inspection, and Outgoing quality control
Inspection Equipment: CMM, Caliper, Plug Gage, Screw Gauge
Application: Auto Parts
Lead Time: 30-35 days
Trade Term: FOB Ningbo
NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY
NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY was established in 2001. BOLANG centres high precision CNC machining as our core competence, the company specializes in producing auto parts, agriculture parts, machinery parts, lighting parts, hardware fittings etc. We can provide pressure casting, Sand Casting, Investment Casting, gravity casting, the material covers aluminum alloy such as A380, A390, ADC12,YL102, A356, aluminum extrusion of 6000 series, zinc alloy, iron, copper etc. The products are mainly exported to countries such as USA, Europe (England, Germany, Italy, Belgium etc), Asia (Japan,Korea etc). And the company has successfully passed ISO/TS16949 quality management system certificate. The company possesses strong technical power and a highly qualified staff team, the company has casting machines with robots, Trimming machines, high precision machining centers, CNC lathes, automatic drilling and tapping machines, polishing machines, vibration grinding machines, shot blasting machines, umtrasonic cleaners etc. The company has quality inspection facilities, like CMM, spectrometer, roughness meter, hardness meter, measuring projector, tensile test machine, pneumatic measuring tool, self-design leak test machine etc.
- Company Name: NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY
- Representative: LIU CHENGZHI
- Product/Service: Die Casting , Precision Machining , Precision Casting , Pressure Casting , High Precision CNC Machining , Ferrous Metal
- Capital (Million US $): 1000000 RMB
- Year Established: 2001
- Total Annual Sales Volume (Million US $): US$2.5 Million - US$5 Million
- Export Percentage: 91% - 100%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 3
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 1,000-3,000 square meters
- Factory Location: Guisi Industrial Zone, Luotuo Street, Zhenhai District,Ningbo,315206,China
- Contact Person: Ms. sunny
- Tel: 86-0574-86556929
Premium Related Products